You Are Here :
Home 
Spare Parts & Accessories Controls and Valves Controls and Valves
Spare Parts & Accessories Controls and Valves Controls and Valves
Controls and Valves FOR AIR CONDITIONER
ACB Cartridge Pressure Control is a small disc type pressure control for use in refrigeration and air conditioning systems.
ACB is as standard equipped with a 6 amp contact system with automatic or manual reset.
|
Emerson's A-AS Suction Accumulators protect compressors from liquid slugging. They have solid copper connections, corrosion resistant epoxy powder paint finish.
|
The valves can be installed in any section of a refrigerating system, where it is necessary to avoid an inversion of the refrigerating flow.
|
Filter drier cores remove moisture, acids, and debris from the system. Choosing the right filter drier core is essential to providing feliable, long-lasting system protection.
|
Cores for replaceable core type filterdriers are molded with the same desiccants that are used in the popular sealed filter-driers. Cores are individually packed in metal cans, fully activated, and hermetically sealed against moisture and dirt.
|
Emerson uses stainless steel power elements that unsusceptible to corrosion. We offer products with conventional, as well as balanced ported designs that are advantageous when applied to systems with large load variations and/or floating head applications
|
Brass bar body, externally adjustable valve. Inlet has a permanent 12 mesh strainer. This valve features a balanced port construction, and it is suitable for
both air conditioning and refrigeration applications.
|
T 2/TE 2 thermostatic expansion valves are used for liquid injection into evaporators on both refrigeration and air conditioning systems using fluorinated refrigerants.
|
DCL filter driers are optimised for HCFC and CFC refrigerants and mineral or benzene oils. The filter driers are hermetic and approved for up to 46 bar, depending on type.
|
The EK liquid line filter drier is a premium compacted bead filter drier that is buffered by an initial 40-micron fiber-glass filter to remove most of the solid contaminants and sludge and a 20-micron final filter to remove any remaining contamination.
|
The valves are designed for installation on commercial refrigerating systems and on civil and industrial conditioning plants
|
The valves are designed for installation on commercial refrigerating systems and on civil and industrial conditioning plants
|
Big screen LCD display. Display Two-place temperature, one-place humidity simultaneously. Comfort display. Three kinds of placement.
|
Oil separators serve a critical function in many
refrigeration systems. Regardless of the type of
compressor, oil will leave with the discharge gas.
This oil must be separated from the high pressure
gas and returned to the compressor.
|
KP pressure controls are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure.
|
For use with fluorinated refrigerants as well as with air
and water. (Allowable fluid temp.: －20 to 120°C)
|
The KP series are suitable for gaseous media and air. They are fitted with a single-pole switch changeover (SPDT), and can control single-phase ac motors of up to 2 kW directly.
|
Quick couplers are used in a hydraulic or pneumatic system to quickly connect lines without losing fluid or fluid pressure.
|
Solenoid Valves, Fluorinated Refrigerants The solenoid valve program covers a lot of different valves designed for specific applications in the refrigeration plant.
|
